RS Calibration : Pipette Calibration and PMs

ENVIRONMENTALLY CONTROLLED PIPETTE LAB ISO 9001 CERTIFIED

RS Calibration offers calibration, preventive maintenance, repair, and validation of all major brands of pipettes.

  • Local Pickup and Delivery
  • Onsite Service Available
PARTIAL LIST OF
MANUFACTURERS SUPPORTED

  • Biohit
  • Brand Scientific
  • Gilson
  • Matrix
  • Rainin
  • Socorex
  • Themoscientific
  • Vista Lab
  • VWR
TYPES OF PIPETTES

  • Bottletop Dispenser
  • Electronic Pipette
  • Multichannel
  • Repeater
  • Single Channel

 

 

 

 

 



THREE CALIBRATION PLANS DESIGNED TO MEET YOUR NEEDS...

Plan A
Plan B
Plan C
No As Found data is provided. As Found condition should be PASSED VISUAL INSPECTION. The pipette is received and physically inspected for O-ring and seal integrity and replaced if necessary, then re-assembled. If replacement is not necessary, the O-ring and seal is lubricated. . As Left data is provided. Parts are billed to customer. As Found data is provided. The pipette is received and As Found data is taken. The pipette is then physically inspected for O-ring and seal integrity and replaced if necessary, then re-assembled. If replacement is not necessary, the O-ring and seal is lubricated. The pipette is calibrated to cover its minimum and maximum value. As Left data is provided. Parts are billed to customer. Per custom customer requirement as noted on work order.
Plan A + PM
Plan B + PM
 
Same as Plan A plus automatically replace O-ring and seal, 12-point inspection of pipette, then re-assembled. Seals and O-rings are replaced at no charge; additional parts are billed to customer. Same as Plan B plus automatically replace O-ring and seal, 12-point inspection of pipette, then re-assembled. Seals and O-rings are replaced at no charge; additional parts are billed to customer.  


12-POINT INSPECTION

PM includes the following 12-point inspection and replacement of parts. If necessary, reference manufacturer care and maintenance manuals for inspection requirements.

1. Piston
2. Shaft
3. Shaft Coupling
4. Tip Ejector
5. Tip Ejector Mechanism
6. Plunger Button

7. Plunger Rod
8. Spring
9. Micrometer
10. O-Ring
11. Seal
12. Volume Indicator


PIPETTE CALIBRATION PLAN CHART

Plan Category No Program Pipette Channels Volumes As Found Weighings Pipette Channels Volumes As Left Weighings Channels
Plan A PA Single Channel 1   N/A   2 4 1
  PA-M8 Multichannel ALL 8   N/A   2 4 8
  PA-M12 Multichannel ALL 12   N/A   2 4 8
  PA-M24 Multichannel ALL 24   N/A   2 4 8
PA Plus PM Single Channel 1   N/A   2 4 1
Plan B PB Single Channel 1 2 4 1 2 4 1
  PB-M8 Multichannel ALL 8 2 4 8 2 4 8
  PB-M12 Multichannel ALL 12 2 4 12 2 4 12
  PB-M24 Multichannel ALL 24 2 4 24 2 4 24
PB Plus PM Single Channel 1 2 4 1 2 4 1